CONVEYOR BELT CLEANING
The experts at Spraying Systems Co. can help prevent conveyor belt issues such as airborne dust, belt damage and conveyor carryback by optimizing your spray setup to ensure smaller dust particles, often missed by scrapers, are removed.
Fine pieces of ore can often remain attached underneath conveyor belts instead of falling off. This is referred to as conveyor carry back which often results in a damaged belt and potentially belt fires.
Many mines currently have belt scraper systems in place, which are able to remove the larger pieces of ore but the smaller pieces remain trapped. Belt life is also reduced as the scrapers often dig into the belts.
Spraying Systems Co. has designed the AutoJet® Belt Cleaning System which ensures all ore fragments are completely removed from the conveyor belt. The system uses a High Pressure Low Volume (HPLV) water wash that is able to spray and scrape build-up without causing damage to the belt.
Spraying Systems Co. AutoJet® Technologies division can provide an effective and efficient turnkey solution with the following benefits:
- Reduced water consumption
- Less risk of premature belt failure
- Reduced belt temperature in hot weather
Maintaining the state of belt cleaning nozzles is a critical step in avoiding possible mishaps. Our engineers specialize in dust systems and are able to detect nozzles that are damaged and not working as they should be.
Spray Technology for Dust Control
Get our guide to selecting the optimal spray system for your dust control application.
Underground Mining Nozzle Comparison Video
See how our underground mining nozzles compare to the competition’s in this side-by-side view.
Water Spray Optimization and Maintenance Guide
Learn how to keep your water spray in peak operating condition.
Reference Guide: Understanding Drop Size
Learn how drop size is measured and why it matters.
BD WhirlJet® Nozzles
An industry standard for dust suppression, these nozzles produce small drops and have large orifices to reduce clogging.