To view this page ensure that Adobe Flash Player version 11.1.0 or greater is installed.

WhirlJet ® Nozzles: In-Line Standard, In-Line Wide Angle, Offset-Type Standard and Deflected Sprays S S TA N D A R D A N G LE S P R AY | W WI D E A N G LE S P RAY Hollow CONE Overview: WhirlJet In-line, Offset and Deflected Sprays • Hollow cone spray pattern • In-line versions ideal for dust control in mining operations WhirlJet BD, BDM and BA Nozzles Liquid passes through a hole on the inlet side of the nozzle. The liquid then enters a whirlchamber where it spins in a circle at high speed. The rotation forces the liquid away from the center toward the edges. This causes the liquid to exit the orifice in a hollow cone pattern. – BD versions have a lower profile projection for installation in a tee or pipe header – In-line BDM features recessed orifice area to protect from damage; self-locking cap to prevent loss due to vibration; fiberglass-reinforced nylon inlet body • BA offset style ideal for installations with physical space limitations • Spray angles: Standard – 43° to 94°, Wide – 102° to 125° • Deflected spray versions available with 120°, 150° and 180° included angle of spray at 10 psi (0.7 bar) • Uniform spray distribution from .11 to 38 gpm (.41 to 145 lpm) • Operating pressures up to 500 psi (35 bar) WhirlJet Options S S S W W BD 3/8" to 1-1/2" male conn. In-line nozzle Removable cap RELATIVE DROP SIZE IN MICRONS BDM “Miner Nozzle” 3/8" male conn. In-line nozzle Removable cap/nylon body 10 to 100 BA 3/8" to 1/2" male conn. Offset style nozzle Removable cap 100 to 500 500 to 1000 DeflectoJet ® 8686 1/8" to 3/8" male conn. Deflected nozzle Removable deflector cap 1000 to 5000 Drop size will vary based on flow rate and pressure. | 1.630.665.5000 D27