FoamJet Nozzles (left),
QuickJet^® FoamJet Nozzles

Plastic FoamJet^{^®} Nozzles Specifications and Accessories

Our plastic FoamJet spray tips feature an air induction process to generate aerated foam in a flat spray pattern with approximate spray angles of 40º, 75º or 105º, using diluted foaming agent. As a result, the foam lasts longer than conventional sprays, providing more effective cleaning while minimizing chemical use.

Feature Overview:

The FJP series offers a spray tip pre-orifice and body construction made of polypropylene.
The QJFJP series offers Celcon^®, chemical-resistant, lightweight yet durable high-performance plastic, pre-orifices with a standard nylon body, stainless steel screen and Viton^® O-rings
These materials of construction complement our complete line of foaming nozzles and make these spray tips a low-cost alternative to brass or stainless steel models
When coupled with our UniJet^® nozzle system, installation and removal of the spray tips for maintenance, capacity change or replacement are simple. The spray tips fit into all UniJet body assemblies and into the Quick UniJet System for automatic alignment, added versatility and color-coded caps. QJFJP has an integrated quickset cap
The plastic FoamJet spray tips are available in six different capacity sizes. The pre-orifice inserts are color-coded for easy capacity identification. Capacities range from .15 to 1.0 gpm at 40 psi (.57 to 3.9 l/min at 3 bar). The tips operate at a maximum pressure of 150 psi (10 bar) or 100 psi (7 bar) in the Quick UniJet System

Performance Data:

Part Number	Spray Angle*
FJP-20__-CE	20º
FJP-40__-CE	40º
FJP-80__-CE	80º

*Based on spraying water at 40 psi (3 bar) with air aspiration holes blocked.

Capacity Size	Orifice Insert Code	Capacity gallons per minute (liters per minute)
Capacity Size	Orifice Insert Code	40 psi (3 bar)	50 psi (4 bar)	60 psi (5 bar)
02	Yellow	.20 (.79)	.22 (.91)	.24 (1.0)
03	Blue	.30 (1.2)	.34 (1.4)	.37 (1.5)
04	Red	.40 (1.6)	.45 (1.8)	.49 (2.0)
05	Brown	.50 (2.0)	.56 (2.3)	.61 (2.5)
06	Gray	.60 (2.4)	.67 (2.7)	.73 (3.1)
08	White	.80 (3.2)	.89 (3.6)	.98 (4.1)
10	Light Blue	1.0 (3.9)	1.1 (4.6)	1.2 (5.1)

FoamJet Nozzle Accessories and Assembly Options

50800 TriggerJet^{^®} and TriggerJet with Extension
	Integrated trigger lock for ease-of-use in manual applications. For more information request Data Sheets 50800 or 50800-1.

QJ8360 Diaphragm Blue Color-Coded Check Valve Nozzle Body
	The diaphragm check valve body saves on chemical usage and enables fast, easy installation and maintenance.

50580 and 13340 Siphon Injectors
	Adjustable and fixed siphon injectors for reliable metering of your two-fluid spray applications. For more information request Bulletin 552B.

UniJet QuickJet Split Eyelet Spray Nozzle System
	With this complete system, installation and removal of the spray tips for maintenance, capacity change or replacement is simple. The split-eyelets are fastened onto existing headers to ensure consistent alignment. Nozzles can then be easily maintained and switched without disrupting the integrity of the spray alignment.

Celcon^® is a registered trademark of Celanese Corporation.
Viton^® is a registered trademark of DuPont Performance Elastomers.

Visit iSpray for selection assistance and easy online ordering.
Or, contact your local sales and engineering office.

Catalog 70 US

View · Request

Catalog 70 Metric