 |
|
29JAUCO
|
29JAUCO Automatic Air Atomizing Spray Nozzle
Electrically-Actuated Spray Nozzle is Designed for High Speed or Short Duration Spray Applications
Benefits
- Continuous duty or high-speed cycling capability up to 1000 cycles per minute
- Ideal for food processing, marking, sealing and lubrication applications
- Mounting and connections are located at the back to minimize the nozzle profile in applications where space is tight
- All wear parts are easily accessed from the front for minimum maintenance downtime. Mounting and connections are not disturbed for maintenance
- Built-in clean-out needle automatically activates during each spray cycle for maximum protection against clogging
- Fluid can be recirculated through the body to maintain consistent temperature. Pipe plugs can be used to easily shut off recirculation
- Electrical connection via liquid-tight miniature connector
- Uses new threadless ¼J spray nozzle set-ups
Specifications
- Cycling speed: continuous to 1000 cycles per minute
- Max. liquid pressure: 60 psi (4 bar)
- Max. air pressure: 100 psi (7 bar)
- Max. flow rate: 44.7 gph (169 l/h)
- Fluid orifices from .028" to .080" (0.7 mm to 2.0 mm)
- Max. fluid operating temperature: 150°F (66°C)
- Power: 24 VDC actuation, 0.75 AMPS
- Inlet connection: 1/4" NPT or BSPT (F)
- Materials: stainless steel, Ryton®, TEFLON® or PEEK™ with Viton® O-ring seals
- Weight: 20 oz. (0.6 kg)
- Mounts to flat surface or bracket with two screws
- Includes 13' (3.9 m) of polyurethane-jacketed cable; 3-pole, female M8 threaded style; electrical connector is constructed of nickel-plated brass
Visit iSpray for selection assistance and easy online ordering.
Or, contact your local sales and engineering office.
|
