F54 - AirJet® Fogger Spray Nozzles, Special Purpose
Features and Benefits
- 23412 produces high quality, cost-efficient dry
fog.
- Drops average fifteen microns in size and less.
- Drop size is adjustable to meet specific industrial needs by changing the ratio of compressed air to water.
- Maintenance time is reduced because the built-in check valve, spray tip, and internal strainer are quickly serviced without tools.
- Can use PVC pipe and low-pressure air tubing.
- Tip has a relatively large clog-reducing orifice.
- QJ25655 provides fast installation of the nozzle
onto the liquid supply pipe – no additional pipe
fittings are required.
- Pipe cutting, threading and brazing are eliminated.
- Features a chemical-resistant, tight-fitting Buna-N seal to ensure leak-free performance.
23412
1/4" NPT or BSPT (F) threaded type
QJ25655
Split-eyelet type to clamp on 1/2", 3/4", 1" pipe size
Specifications
| To
Clamp On Pipe Size (in.) |
AirJet Fogger Type |
Fluid Orifice No. |
Orifice Dia. Nom. (mm) |
| 1/2 | QJ25655 | 16 | .41 |
| 3/4 | 20 | .51 | |
| 1 | 26 | .66 |
|
Nozzle Inlet (in.) |
AirJet Fogger Type |
Fluid Orifice No. |
Orifice Dia. Nom. (mm) |
| 1/4 | 23412 | 16 | .41 |
| 20 | .51 | ||
| 26 | .66 |
Ordering Info
| Complete Nozzle Assembly | ||||
| QJ25655 | – | 3/4 | – | 20 |
| | | | | | | ||
| Nozzle Body |
Pipe Size |
Fluid Orifice Dia. |
||
| Complete Nozzle Assembly | ||||
| 23412 | – | 1/4 | – | 20 |
| | | | | | | ||
| Nozzle Body |
Inlet Conn. |
Fluid Orifice Dia. |
||
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
