B48 - UniJet® Spray Nozzles, Square Spray
Performance Data
TG-SQ
| *At the stated pressure in bar. | ||||||||||||||||
| Body Inlet Conn. (in.) |
Capacity Size |
Orifice Dia. Nom. (mm) |
Max. Free Passage Dia. (mm) |
Capacity (liters per minute)* |
Spray Angle (°)* |
|||||||||||
| 0.4 | 0.5 | 0.7 | 1.5 | 2 | 3 | 4 | 6 | 7 | 10 | 0.5 | 1.5 | 6 | ||||
| 1/4 | 6SQ | 2.4 | 1.3 | 1.8 | 2.0 | 2.3 | 3.2 | 3.7 | 4.5 | 5.1 | 6.1 | 6.6 | 7.8 | 60 | 66 | 60 |
| 8SQ | 2.5 | 1.3 | 2.4 | 2.6 | 3.0 | 4.3 | 4.9 | 6.0 | 6.8 | 8.2 | 8.8 | 10.4 | 70 | 75 | 68 | |
| 10SQ | 2.8 | 1.6 | 2.9 | 3.3 | 3.8 | 5.4 | 6.2 | 7.4 | 8.5 | 10.2 | 11.0 | 13.0 | 62 | 66 | 60 | |
| 12SQ | 3.2 | 1.6 | 3.5 | 3.9 | 4.6 | 6.5 | 7.4 | 8.9 | 10.2 | 12.3 | 13.2 | 15.5 | 70 | 75 | 68 | |
| 3/8 | 18SQ | 4.0 | 2.4 | 5.3 | 5.9 | 6.9 | 9.7 | 11.1 | 13.4 | 15.3 | 18.4 | 19.8 | 23 | 71 | 75 | 68 |
|
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. Other body types may be available. Contact representative for further information. |
||||||||||||||||
Materials
| Material | Material Code | Spray Tip |
| TG-SQ | ||
| Brass | (none) | • |
| 303 Stainless Steel | SS | • |
|
Other materials available upon request. |
||
Ordering Info
| UniJet Complete Nozzle | ||||||||
| Nozzle Body | Spray Tip | |||||||
| 1/4 | T | – | SS | + | TG | – | SS | 12SQ |
| | | | | | | | | | | | | |||
| Inlet Conn. | Body Type | Material Code | Tip Type | Material Code | Capacity Size | |||
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
