F19 - Pressure Spray Set-ups, External Mix, High Transfer
Efficiency (HTE), 1/4J Series
Features and Benefits
- A new air cap design enables the use of lower air pressures to achieve the same spray performance as conventional external mix set-ups.
- HTE set-ups operate at pressures as low as 5 psi (0.3 bar).
- A large air chamber directly feeds the air exit orifices. Design provides high liquid transfer efficiency, minimal air loss, and minimal misting.
- Air consumption is reduced and maximum spray coverage on the target is achieved.
- For complete information, request HTE Air Atomizing Set-ups Bulletin.
- See also
- Section G, Automatic Spray Nozzles
Air Caps
HTE air cap produces a flat spray and a round spray.
1158 retainer ring and 3612 gasket must be ordered separately from the spray set-up, but are included in the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Flat Spray (External Mix)
| *At the stated pressure in bar. | ||||||||||||||||
|
Spray Set-up No. |
Spray Set-up Consists of Fluid and Air Cap Combination |
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)* | ||||||||||||||
| Liquid Pressure | ||||||||||||||||
| 0.3 | 0.7 | 1 | 1.4 | 2.1 | ||||||||||||
| Air Press. | l/h | Air l/min |
Air Press. | l/h | Air l/min |
Air Press. | l/h | Air l/min |
Air Press. | l/h | Air l/min |
Air Press. | l/h | Air l/min |
||
| SU-HTE60D | Fluid
Cap PF28100 + Air Cap LP130262-60 |
.55 | 11.4 | 94 | .55 | 15.9 | 94 | – | – | – | – | – | – | – | – | – |
| .69 | 11.4 | 106 | .69 | 15.9 | 106 | .69 | 19.3 | 106 | – | – | – | – | – | – | ||
| .83 | 11.4 | 118 | .83 | 15.9 | 118 | .83 | 19.3 | 118 | .83 | 23 | 118 | – | – | – | ||
| .97 | 11.4 | 129 | .97 | 15.9 | 129 | .97 | 19.3 | 129 | .97 | 23 | 129 | .97 | 27 | 129 | ||
| 1.1 | 11.4 | 139 | 1.1 | 15.9 | 139 | 1.1 | 19.3 | 139 | 1.1 | 23 | 139 | 1.1 | 27 | 139 | ||
| SU-HTE60E | Fluid
Cap PF20100 + Air Cap LP130262-60 |
.41 | 6.1 | 81 | .41 | 8.3 | 81 | – | – | – | – | – | – | – | – | – |
| .55 | 6.1 | 94 | .55 | 8.3 | 94 | .55 | 9.8 | 94 | – | – | – | – | – | – | ||
| .69 | 6.1 | 106 | .69 | 8.3 | 106 | .69 | 9.8 | 106 | .69 | 11.7 | 106 | – | – | – | ||
| .83 | 6.1 | 118 | .83 | 8.3 | 118 | .83 | 9.8 | 118 | .83 | 11.7 | 118 | – | – | – | ||
| .97 | 6.1 | 129 | .97 | 8.3 | 129 | .97 | 9.8 | 129 | .97 | 11.7 | 129 | .97 | 14.0 | 129 | ||
| 1.1 | 6.1 | 139 | 1.1 | 8.3 | 139 | 1.1 | 9.8 | 139 | 1.1 | 11.7 | 139 | 1.1 | 14.0 | 139 | ||
| SU-HTE60F | Fluid
Cap PF16100 + Air Cap LP130262-60 |
.28 | 3.8 | 65 | – | – | – | – | – | – | – | – | – | – | – | – |
| .41 | 3.8 | 81 | – | – | – | – | – | – | – | – | – | – | – | – | ||
| .55 | 3.8 | 94 | .55 | 5.3 | 94 | .55 | 6.4 | 94 | .55 | 7.6 | 94 | – | – | – | ||
| .69 | 3.8 | 106 | .69 | 5.3 | 106 | .69 | 6.4 | 106 | .69 | 7.6 | 106 | – | – | – | ||
| .83 | 3.8 | 118 | .83 | 5.3 | 118 | .83 | 6.4 | 118 | .83 | 7.6 | 118 | .83 | 9.1 | 118 | ||
| .97 | 3.8 | 129 | .97 | 5.3 | 129 | .97 | 6.4 | 129 | .97 | 7.6 | 129 | .97 | 9.1 | 129 | ||
| 1.1 | 3.8 | 139 | 1.1 | 5.3 | 139 | 1.1 | 6.4 | 139 | 1.1 | 7.6 | 139 | 1.1 | 9.1 | 139 | ||
Add DF to part number for “Drip Free™” set-ups. Example: SU-HTE60D-DF.
The operating pressures and flow rates are based on spraying water and air at room temperature.
Adjustments may need to be made to accommodate other liquids with different characteristics.
|
Spray Set-up No. |
Spray Dimensions |
|||||
| Air* | Liquid* | A (cm) |
B (cm) |
C (cm) |
D (cm) |
|
| SU-HTE60D | .69 1.0 .69 1.0 .69 |
.34 .34 .69 .69 1.4 |
18 13 29 15 25 |
33 15 34 23 38 |
36 20 36 25 43 |
91 102 102 114 104 |
| SU-HTE60E | .34 .69 1.0 .34 .69 1.0 |
.34 .34 .34 .69 .69 .69 |
18 10 8 20 17 17 |
23 11 11 28 18 18 |
16 11 14 33 18 19 |
64 79 86 56 69 81 |
| SU-HTE60F | .21 .34 .69 1.0 .34 .69 1.0 |
.34 .34 .34 .34 .69 .69 .69 |
24 23 20 17 22 19 15 |
28 25 23 19 24 23 19 |
33 30 29 22 30 28 24 |
58 61 64 71 56 64 74 |
