E8

E8 - UniJet® Spray Nozzles, Standard Spray

Materials

Material	Material Code	Spray Tip
Material	Material Code	TN	TN-SSTC
Brass	(none)	•
303 Stainless Steel	SS	•	•
Other materials available upon request.

See Also

Performance Data

TN-SSTC

*At the stated pressure in bar.
Body Inlet Conn. (in.)	Capacity Size	Orifice Dia. Nom. (mm)	Capacity (liters per hour)*					Approximate Spray Pattern Dia. (at 30 cm distance) (cm)
Body Inlet Conn. (in.)	Capacity Size	Orifice Dia. Nom. (mm)	25	50	80	100	140	Approximate Spray Pattern Dia. (at 30 cm distance) (cm)
1/4	.60	.41	6.8	9.7	12.2	13.7	16.2	7.6
	.80	.34	9.1	12.9	16.3	18.2	22	7.6
	.90	.41	10.3	14.5	18.3	21	24	7.6
	1	.51	11.4	16.1	20	23	27	8.9
	1.5	.51	17.1	24	31	34	40	8.9
	1.8	.64	21	29	37	41	49	11.4
	2	.71	23	32	41	46	54	11.4
	3	.71	34	48	61	68	81	15.2
	4	1.1	46	64	82	91	108	20.3
	6	1.1	68	97	122	137	162	25.4
	8	1.5	91	129	163	182	216	30.5
	9	1.5	103	145	183	205	243	35.6
	10	1.6	114	161	204	228	270	40.6
	12	1.9	137	193	245	274	324	45.7
	14	1.9	160	226	285	319	378	35.6
	15	2.1	171	242	306	342	405	40.6
	16	2.2	182	258	326	365	432	45.7
	18	1.9	205	290	367	410	485	40.6
	20	2.1	228	322	408	456	539	45.7
	22	1.9	251	355	449	501	593	30.5
	24	2.1	274	387	489	547	647	33
	26	2.2	296	419	530	593	701	35.6

Spray pattern diameter is based on liquid with viscosity of 20 seconds #3 Zahn Cup spraying at 1600 psi (110 bar).

Coverage will vary with viscosities and pressures. Tabulated capacities are based on water.

Other body types may be available. Contact representative for further information.