E14 - Hydraulic Fogging Spray Nozzles, Wide Angle Spray
Features and Benefits
- Finely atomized sprays in a hollow cone misting-type spray pattern using liquid pressure alone – compressed air not required.
- Uniform distribution over a wide range of flow rates and pressures.
- Very small drops often achieving misting performance – ideal for applications where wetting is needed without excess moisture.
- 22624-80° SF Fogger spray tips for UniJet® nozzle bodies are available with a brass tip body and core, stainless steel core tip; SF spray tips are all brass.
- SF-CE and SM-CE spray nozzles made of Celcon®
feature:
- Minimal buildup.
- Increased chemical resistance for longer wear life.
- Lower maintenance.
- Removable stainless steel 200 mesh screen.
- Up to 110° spray angle at 40 psi (2.8 bar) – maximum pressure of 200 psi (14 bar) at maximum temperature of 200°F (93°C).
22624, SF
22624 brass tip body and core, stainless steel core tip
SF all brass
1/8SF-CE, SM-CE
1/8" NPT or BSPT (M)
Optimization Tips
Applications
- Misting of produce to preserve freshness and storage life
- Wetting without excess moisture
See Also
- Air atomizing nozzles
Performance Data
| *At the stated pressure in bar. | |||||||||
| Fogger Nozzle No. |
Fogger Tip No. |
Capacity (liters per hour)* |
Spray Angle (°)* |
||||||
| 1.5 | 3 | 7 | 10 | 15 | 3 | 7 | 15 | ||
| 1/8SF-CE1 | – | 1.8 | 2.5 | 3.8 | 4.5 | 5.4 | 110 | 110 | 100 |
| 1/8SF-CE2 | SF2, SF-CE2 | 3.5 | 5.0 | 7.6 | 9.1 | 10.8 | 105 | 105 | 100 |
| 1/8SF-CE3 | SF3, SF-CE3 | 5.3 | 7.5 | 11.4 | 13.7 | 16.2 | 110 | 110 | 100 |
| 1/8SM-CE1 | SM-CE1, 22624-1-80 |
2.8 | 3.9 | 6.0 | 7.2 | 8.5 | 80 | 75 | 75 |
| 1/8SM-CE2 | SM-CE2, 22624-2-80 |
5.6 | 7.9 | 12.0 | 14.4 | 17.0 | 80 | 75 | 75 |
Dimensions and Weights
| Standard | Nozzle |
Length (mm) |
Hex. (mm) |
Net Weight (kg) |
 |
T+22624, TT+22624, T+SF, TT+SF |
47.6 | 20.6 | .07 |
 |
1/8SF-CE, 1/8SM-CE |
35 | 11.1 | 2.2 |
|
Based on largest/heaviest version of each type. |
||||
Ordering Info
| UniJet Complete Nozzle | |||||||
| Nozzle Body | Spray Tip | ||||||
| 1/4 | T | + | 22624 | – | 1 | – | 80 |
| | | | | | | | | | | |||
| Inlet Conn. |
Body Type |
Tip Type |
Capacity Size |
Spray Angle |
|||
| UniJet Complete Nozzle | ||||
| Nozzle Body | Spray Tip | |||
| 1/4 | T | + | SF | 2 |
| | | | | | | | | |
| Inlet Conn. |
Body Type |
Tip Type |
Capacity Size |
|
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
| Complete Fogger Nozzle | |||
| 1/8 | SF | – | CE2 |
| | | | | | | |
| Inlet Conn. |
Nozzle Type |
Capacity Size |
|
