D37 - UniJet® Spray Nozzles, Wide Angle Spray
Performance Data
T-W
| *At the stated pressure in bar. | ||||||||||||||
| Inlet Conn. (in.) |
Capacity Size |
Inlet Openings (mm) |
Orifice Dia. Nom. (mm) |
Capacity (liters per hour)* |
Spray Angle (°)* |
|||||||||
| 0.7 | 1 | 1.5 | 2 | 3 | 4 | 6 | 7 | 1.5 | 3 | 6 | ||||
| 1/4 | T2W | Two .41 x .38 | .79 | – | – | 5.6 | 6.4 | 7.9 | 9.1 | 11.2 | 12.1 | 130 | 140 | 136 |
| T3W | Two .51 x .48 | .99 | – | 6.8 | 8.4 | 9.7 | 11.8 | 13.7 | 16.8 | 18.1 | 138 | 140 | 137 | |
| T4W | Two .61 x .53 | 1.1 | – | 9.1 | 11.2 | 12.9 | 15.8 | 18.2 | 22 | 24 | 140 | 140 | 138 | |
| T5W | Two .71 x .69 | 1.3 | 9.5 | 11.4 | 14.0 | 16.1 | 19.7 | 23 | 28 | 30 | 140 | 140 | 138 | |
| T6W | Two .81 x .66 | 1.4 | 11.4 | 13.7 | 16.8 | 19.3 | 24 | 27 | 34 | 36 | 140 | 140 | 138 | |
| T8W | Two .91 x .74 | 1.6 | 15.3 | 18.2 | 22 | 26 | 32 | 36 | 45 | 48 | 140 | 140 | 136 | |
| T10W | Two 1.0 x .76 | 1.8 | 19.1 | 23 | 28 | 32 | 39 | 46 | 56 | 60 | 140 | 140 | 136 | |
| T12W | Two 1.1 x .74 | 2.0 | 23 | 27 | 34 | 39 | 47 | 55 | 67 | 72 | 140 | 140 | 136 | |
|
Other body types may be available. Contact representative for further information. |
||||||||||||||
Dimensions and Weights
| Standard | Nozzle Type |
Length (mm) |
Hex. (mm) |
Net Weight (kg) |
 |
T+T-W | 47.5 | 20.6 | .07 |
| TT+T-W | 49.5 | 20.6 | .06 | |
|
Based on largest/heaviest version of each type. |
||||
Materials
| Material | Material Code | Spray Tip |
| T-W | ||
| Brass | (none) | • |
| 303 Stainless Steel | SS | • |
|
Other materials available upon request. |
||
| Mesh Selection Guide | |
| Orifice Dia. in. (mm) |
Recommended Screen Mesh |
| Up through .018 (.46) |
200 |
| .019 (.47) through .031 (.79) |
100 |
| .032 (.80) and larger |
50 |
Ordering Info
| UniJet Complete Nozzle | ||||||||
| Nozzle Body | Spray Tip | |||||||
| 1/4 | TT | – | SS | + | T | – | SS | 2W |
| | | | | | | | | | | | | |||
| Inlet Conn. | Body Type | Material Code | Tip Type | Material Code | Capacity Size | |||
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
