G9 - Air Atomizing, Air-Actuated, 10530 Series
Features and Benefits
- Versatile and practical to meet a variety of liquid spray requirements.
- Produces fine atomization by mixing air and liquid supplied at line pressures up to 125 psi (9 bar).
- Self-contained air cylinder provides controlled on/off operation at any desired frequency up to 180 cycles per minute.
- Completely separate nozzle body and air cylinder assemblies require minimum maintenance and nozzle cleaning is fast and easy.
- For high temperature applications, Teflon® packing and gaskets in the nozzle withstand continuous use at temperatures up to 400°F (205°C). Air cylinder packing is recommended for temperatures up to 150°F (65°C).
-
Key feature overview for
10535-1/4J:
- Offers a wide range of capacities up to 72 gph (280 l/h) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free™ spray set-ups.
-
Key feature overview for
10536-1/2J:
- Offers a wide range of capacities up to 306 gph (1158 l/h) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free spray set-ups.
-
Key feature overview for
10537-1J:
- Offers a wide range of capacities up to 29 gpm (107 l/min) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free spray set-ups.
10535-1/4J
1/4" NPT or BSPT (F)
air/liquid inlet connection
1/8" NPT or BSPT
cylinder air connection
10536-1/2J
1/2" NPT or BSPT (F)
inlet connection
1/4" NPT or BSPT (F)
cylinder air connection
10537-1J
1" NPT or BSPT (F) inlet connection
Optimization Tips
- For the fastest and most precise control of spray cycling and spray pressures possible, use the AutoJet® Spray Controllers with this automatic spray nozzle.
- See page G2 for more optimization tips.
See Also
- For 10535-1/4J, request Data Sheet 10535
- For 10536-1/2J, request Data Sheet 10536
- For 10537-1J, request Data Sheet 10537
- Automatic air-actuated nozzles use the same set-ups as standard air atomizing nozzles. For performance data, see section F; 1/4J, 1/2J, 1J.
Materials
| Material | Material Code |
Nozzle Type | ||
| 10535 | 10536 | 10537 | ||
| Nozzle Bodies: | ||||
| Nickel-plated Brass | (none) | • | • | • |
| 303 Stainless Steel | SS | • | • | • |
| Spray Set-ups: | ||||
|
Nickel-plated Brass Air Cap and 303 Stainless Steel Fluid Cap |
SSBR | • | • | • |
| 303 Stainless Steel | SS | • | • | • |
| O-ring Material: | ||||
| Viton®* | (none) | |||
| Teflon | TEF | |||
| FDA Viton | VIFDA | |||
| Buna-N | BU | |||
| Ethylene Propylene Rubber | EPR | |||
*Viton is the standard O-ring material.
Ordering Info
| Complete Nozzle Assembly | |||||||||||
| Nozzle Body* | †Spray Set-up | ||||||||||
| 10535 | – | 1/4 | J | – | SS | + | SU11DF | – | SS | – | TEF |
| | | | | | | | | | | | | | | |||||
| Assembly No. |
Inlet Conn. |
Nozzle Body |
Material Code |
Spray Set-up No. |
Material Code |
O-ring Material Code** |
|||||
*Includes retainer and gasket.
BSPT connections require the addition of a “B” prior to the inlet
connection.
**Viton is the standard O-ring material.
†Spray set-up shown is an example, for more information on spray
set-ups and performance data, see Section F, Air Atomizing Spray
Nozzles, 1/4J, 1/2J and 1J Series.
