G18 - Hydraulic, Electrically-Actuated, PulsaJet® Series
Features and Benefits
- Provides clean and accurate atomized sprays and complete shut-off for high speed automatic applications.
- Electrically activated hydraulic atomizing valve accurately controls flow rate.
- Provides fast on/off operation.
- Using the AutoJet® Spray Controllers, the PulsaJet 10000 provides Pulse Width Modulation (PWM) to adjust flow rate at a given spray pressure while maintaining spray pattern integrity. See page G2, Optimization Tips for more information on the benefits of PWM.
- Compact design eliminates the need for compressed air.
- Minimizes overspray in a wide range of applications.
- Uses standard UniJet® spray tips in a wide range of spray capacities.
- Maximum pressure: 100 psi (7 bar) for all versions.
-
Key feature overview for
AA10000AUH-01:
- Use with standard UniJet spray tip capacities up to the -01 size.
- When paired with the 2250 AutoJet Spray Controller, capable of operating up to 10,000 cycles per minute.
-
Key feature overview for
AA10000AUH-03:
- Use with standard UniJet spray tip capacities from the -015 size to the -03 size.
- When paired with the 2250 AutoJet Spray Controller, capable of operating up to 10,000 cycles per minute.
-
Key feature overview for
AA10000AUH-10:
- Use with standard UniJet spray tip capacities from the -03 size to the -10 size.
- When paired with the 2250 AutoJet Spray Controller, capable of operating up to 5,000 cycles per minute.
-
Key feature overview for
AA10000AUH-30:
- Use with standard UniJet spray tip capacities from the -10 size to the -30 size.
- When paired with the 2250 AutoJet Spray Controller, capable of operating up to 2,500 cycles per minute.
- Accessories 50935-SS mounting block for use with all units.
AA10000AUH-01
1/8" NPT or BSPT inlet connection
AA10000AUH-03
1/8" NPT or BSPT inlet connection
AA10000AUH-10
1/8" NPT or BSPT inlet connection
AA10000AUH-30
1/4" NPT or BSPT inlet connection
Optimization Tips
- For the fastest and most precise control of spray cycling and spray pressures possible, use the AutoJet Spray Controllers with this automatic spray nozzle.
- See page G2 for more optimization tips.
Applications
- Coatings
- Lubricating
- Marking
- Moisturizing
- Robotics
- Sealing
See Also
- PulsaJet 10000
†Spray tip shown is an example, for more information on spray tip and performance data, see:
Section B, Full Cone Spray Nozzles
Section C, Flat Spray Nozzles
Section D, Hollow Cone Spray Nozzles
Section E, Fine Spray Nozzles
Ordering Info
| Complete Nozzle Assembly | ||||||||
| Nozzle Body | †Spray Tip | |||||||
| AA10000AUH | – | 01 | + | TPU | – | 80 | 01 | ss |
| | | | | | | | | | | | | |||
| Nozzle Body | Capacity | Tip Type |
Material Code |
Spray Angle |
Capacity Size |
|||
