F7

F7 - Nozzle Bodies/Nozzle Assemblies, 1/8J and 1/4J Series

Features and Benefits

1/4JF features a built-in liquid strainer.
1/4JFN features built-in liquid strainer and liquid shut-off needle.
JBC features the center lines of the air and liquid inlet entering in the back of the nozzle and parallel to the spray projection axis.
JAC features air and liquid inlet connections entering the nozzle at 90° to spray projection axis.
JACN features air and liquid inlet connections entering the nozzle at 90° to spray projection axis and a shut-off needle.
1/8-2JAC dual spray assembly features two opposing spray set-ups with the air and liquid inlet connections perpendicular to the spray axis.
The 7545 multiple swivel spray assembly features each spray set-up mounted on its own swivel body.
- One or two bodies may be used and each can be rotated 360° to the desired position.
- Swivel bodies are locked in place by a stainless steel lock screw that runs vertical through the assembly.
6552-1/8JAC miniature assembly body is only 1/2" (13 mm) thick with a 1-5/32" (29 mm) by 1-1/4" (32 mm) rectangular face.
- The tip of the nozzle projects from the face a maximum of 1-3/16" (30 mm) depending upon the spray set-up used.
1/4JBCJ features a steam jacket around the nozzle body for spraying liquids that are too viscous to spray at room temperature.