F58

Email this page

Previous Page Next Page

F58 - Humidification Spray Nozzles and Units

Features and Benefits

All equipment supplied for humidification systems except piping and wiring.
1/4JH siphon air atomizing nozzles provide automatic, efficient humidity control with low installation and operating costs.
- Nozzles operate either with compressed air drawing water from the float box by siphon action, or with water being delivered to the nozzle under pressure.
- Produces a fine atomized spray for rapid evaporation and efficient humidification.
- For information on siphon set-ups, see pages F23 to F53.
1/4JT pressure-fed air atomizing nozzles provide automatic, efficient humidity control with low installation and operating costs.
- Suitable for use in systems where water is under pressure.
- Have built-in strainers for air and water plus a ball check valve in the water line.
- Produces a fine atomized spray for rapid evaporation and efficient humidification.
- For information on pressure set-ups, see pages F5 to F48.
45400 humidification unit is a self-contained humidifier suitable for use with deionized water (DI).
- Easy to install on a wall or for use in non-ducted applications.
- Air regulator and gauge, 24VDC air control solenoid and air line filter are included within the Humidification Unit.
- Wall-mounting bracket is also provided.
- 9.7 lbs. (4.4 kg).
- For each spray set-up, water capacity ranges from 2.7 lbs./hr at 10 psi (0.7 bar) air to 6.5 lbs./hr at 60 psi (4 bar) air.
YMF MiniFogger® II is ideal for humidification applications with limited space due to its compact design.
- Available with a choice of one to four stainless steel spray nozzle set-ups with a wide variety of flow-rate sizes/droplet sizes and types.
- For each spray set-up, water capacity is 2.65 to 19.68 gph (0.7 to 5.2 l/h), and air capacity is 39 to 52 nl/min at 40 psi (2.8 bar).
- Can be placed in hard-to-reach spaces and can be easily installed on a header, on a wall or on a ceiling.
- 9 lbs. (450 g) for single spray set-up type; 1.04 lbs. (520 g) for multiple four set-up types.
- Height is 5.65" (143.5 mm).
- The body, retainer cap, and tank are made of corrosion-resistant polyacetal with stainless steel air and water connections.
- Materials are also compatible with deionized water.
46215-008 provides a finely atomized spray without the use of compressed air.
- Produces a hollow cone spray pattern.
- Requires a minimum liquid pressure of 450 psi (31 bar) to the nozzle.
- Maximum operating pressure of 1000 psi (69 bar).