Spray Set-up Features
- Each series is available with a pressure spray set-up or siphon spray set-up.
- Each set-up provides a specific spray pattern with a specific capacity and spray coverage range performance.
- Spray set-ups are interchangeable for each nozzle
series.
- Round spray: Extended full cone round spray pattern.
- Wide angle round spray: Hollow cone-type, wide angle round spray pattern.
- 360° circular spray: Hollow cone-type 360° circular spray pattern.
- Flat spray: Extended flat or sheet-type spray pattern.
- Deflected flat spray: Extended flat or sheet-type spray diverted away from the axis of the inlet connection.
- Each spray set-up consists of an air cap and fluid cap.
- For more information request Data Sheets 10616 and 10616-1.
Air cap
Fluid cap
Atomization Control Features
- Achieved by adjusting the air and liquid pressure in the spray set-up.
- Obtaining finer atomization is accomplished by increasing the air pressure and/or lowering the liquid pressure, resulting in a high ratio of air flow rate to liquid flow rate.
External mix with pressure set-ups: Flat and round spray patterns.
Internal Mix Features
- Liquid and air are mixed internally to produce a completely atomized spray.
- Liquid and gas streams are not independent and a change in air flow will affect the liquid flow.
- Internal mix uses pressure set-ups and is
available with the following spray patterns:
- 360° circular spray.
- Deflected flat spray.
- Elliptical spray.
- Flat spray.
- Round spray.
- Wide angle round spray.
Internal mix with pressure set-ups: Flat spray patterns
Internal mix with pressure set-ups: Round spray patterns
External Mix Features
- Liquid and air streams are mixed outside of the nozzle.
- Air and liquid flow can be controlled independently.
- Effective for higher viscosity liquids and abrasive suspensions.
- External mix can use siphon set-ups or pressure set-ups.
- When a siphon set-up is used, a round spray pattern is produced.
- When a pressure set-up is used, a flat spray pattern is produced.
External mix with pressure set-ups: Flat spray patterns
External mix with siphon set-ups: Round spray patterns
