D37 - UniJet® Spray Nozzles, Wide Angle Spray
Performance Data
T-W
| *At the stated pressure in psi. | ||||||||||||||
| Inlet Conn. (in.) |
Capacity Size |
Inlet Openings (in.) |
Orifice Dia. Nom. (in.) |
Capacity (gallons per hour)* |
Spray Angle (°)* |
|||||||||
| 10 | 15 | 20 | 30 | 40 | 60 | 80 | 100 | 20 | 40 | 80 | ||||
| 1/4 | T2W | Two .016 x .015 | .031 | – | – | 1.4 | 1.7 | 2.0 | 2.4 | 2.8 | 3.2 | 130 | 140 | 136 |
| T3W | Two .020 x .019 | .039 | – | 1.8 | 2.1 | 2.6 | 3.0 | 3.7 | 4.2 | 4.7 | 138 | 140 | 137 | |
| T4W | Two .024 x .021 | .044 | – | 2.4 | 2.8 | 3.5 | 4.0 | 4.9 | 5.7 | 6.3 | 140 | 140 | 138 | |
| T5W | Two .028 x .027 | .050 | 2.5 | 3.1 | 3.5 | 4.3 | 5.0 | 6.1 | 7.1 | 7.9 | 140 | 140 | 138 | |
| T6W | Two .032 x .026 | .055 | 3.0 | 3.7 | 4.2 | 5.2 | 6.0 | 7.3 | 8.5 | 9.5 | 140 | 140 | 138 | |
| T8W | Two .036 x .029 | .063 | 4.0 | 4.9 | 5.7 | 6.9 | 8.0 | 9.8 | 11.3 | 12.6 | 140 | 140 | 136 | |
| T10W | Two .040 x .030 | .070 | 5.0 | 6.1 | 7.1 | 8.7 | 10.0 | 12.2 | 14.1 | 15.8 | 140 | 140 | 136 | |
| T12W | Two .044 x .029 | .078 | 6.0 | 7.3 | 8.5 | 10.4 | 12.0 | 14.7 | 17.0 | 19.0 | 140 | 140 | 136 | |
|
Other body types may be available. Contact representative for further information. |
||||||||||||||
Dimensions and Weights
| Standard | Nozzle Type |
Length (in.) |
Hex. (in.) |
Net Weight (oz.) |
 |
T+T-W | 1-7/8 | 13/16 | 2-1/2 |
| TT+T-W | 1-15/16 | 13/16 | 2-1/4 | |
|
Based on largest/heaviest version of each type. |
||||
Materials
| Material | Material Code | Spray Tip |
| T-W | ||
| Brass | (none) | • |
| 303 Stainless Steel | SS | • |
|
Other materials available upon request. |
||
| Mesh Selection Guide | |
| Orifice Dia. in. (mm) |
Recommended Screen Mesh |
| Up through .018 (.46) |
200 |
| .019 (.47) through .031 (.79) |
100 |
| .032 (.80) and larger |
50 |
Ordering Info
| UniJet Complete Nozzle | ||||||||
| Nozzle Body | Spray Tip | |||||||
| 1/4 | TT | – | SS | + | T | – | SS | 2W |
| | | | | | | | | | | | | |||
| Inlet Conn. | Body Type | Material Code | Tip Type | Material Code | Capacity Size | |||
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
