D19 - UniJet® Spray Nozzles, Standard Spray
Performance Data
D
| *At the stated pressure in psi. | |||||||||||||||
| Body Conn. (in.) |
Orifice Disc No. – Core No. |
Orifice Dia. Nom. (in.) |
Capacity (gallons per minute)* |
Spray Angle (°)* |
|||||||||||
| 10 | 20 | 30 | 40 | 60 | 80 | 100 | 150 | 200 | 300 | 20 | 40 | 80 | |||
| 1/4 | D1-46 | .031 | – | – | – | .15 | .18 | .21 | .23 | .28 | .32 | .39 | – | 13 | 15 |
| D1.5-46 | .036 | – | – | – | .21 | .26 | .30 | .33 | .41 | .46 | .56 | – | 15 | 17 | |
| D2-46 | .041 | – | – | .24 | .27 | .33 | .37 | .42 | .50 | .57 | .68 | – | 18 | 21 | |
| D3-46 | .047 | – | .23 | .28 | .32 | .39 | .45 | .51 | .61 | .70 | .86 | 14 | 20 | 24 | |
| D4-46 | .063 | .28 | .39 | .48 | .56 | .68 | .78 | .88 | 1.1 | 1.3 | 1.5 | 23 | 29 | 33 | |
| D5-46 | .078 | .38 | .54 | .66 | .77 | .94 | 1.1 | 1.3 | 1.5 | 1.7 | 2.1 | 33 | 39 | 42 | |
| D6-46 | .094 | .55 | .78 | .95 | 1.1 | 1.4 | 1.6 | 1.7 | 2.2 | 2.5 | 3.1 | 42 | 48 | 50 | |
| D7-46 | .109 | – | .98 | 1.2 | 1.4 | 1.7 | 2.0 | 2.2 | 2.7 | 3.2 | 3.9 | 48 | 53 | 56 | |
| D8-46 | .125 | – | – | 1.6 | 1.8 | 2.3 | 2.6 | 2.9 | 3.6 | 4.2 | 5.1 | – | 60 | 62 | |
| D10-46 | .156 | – | – | 2.2 | 2.5 | 3.1 | 3.5 | 4.0 | 4.8 | 5.6 | 6.8 | – | 66 | 68 | |
| D1-56 | .031 | – | – | – | – | .18 | .21 | .23 | .28 | .33 | .40 | – | – | 13 | |
| D1.5-56 | .036 | – | – | – | – | .26 | .30 | .33 | .41 | .47 | .57 | – | – | 15 | |
|
For nozzles using Orifice Disc Nos. 1, 1.5 and 2 or Core Nos. 13 and 23, Slotted Strainer No. 4514-20 equivalent to 25 mesh screen size is supplied. For all other larger capacity Discs and Cores, Slotted Strainer No. 4514-32 equivalent to 16 mesh screen size is supplied. Other body types may be available. Contact representative for further information. For additional information see Data Sheet 4498-1. |
|||||||||||||||
Materials
| Material | Material Code |
Spray Tip | |
| TX | D | ||
| Brass | (none) | • | • |
| 303 Stainless Steel | SS | • | • |
| Hardened Stainless Steel | HSS | • | |
|
Other materials available upon request. |
|||
| Mesh Selection Guide | |
| Orifice Dia. in. (mm) |
Recommended Screen Mesh |
| Up through .018 (.46) |
200 |
| .019 (.47) through .031 (.79) |
100 |
| .032 (.80) and larger |
50 |
Ordering Info
| UniJet Complete Nozzle | ||||||||
| Nozzle Body | Spray Tip | |||||||
| 1/4 | TT | – | SS | + | TX | – | SS | 1.25 |
| | | | | | | | | | | | | |||
| Inlet Conn. |
Body Type |
Material Code |
Tip Type |
Material Code |
Capacity Size |
|||
| Nozzle Body | Orifice Disc and Core | |||||||
| 1/4 | TT | – | SS | + | D4 | – | 25 | HSS |
| | | | | | | | | | | | | |||
| Inlet Conn. |
Body Type |
Material Code |
Orifice Disc No. |
Core No. |
Core Material Code |
|||
| Disc Only | Core Only | |||||||
| D4 | DC25 | – | HSS | |||||
| | | | | | | ||||||
| Orifice Disc No. |
Core No. |
Core Material Code |
||||||
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
