C32 - Quick FloodJet® Spray Nozzles, Wide Angle Spray
Miniature QuickJet® Bodies
- QJJS male inlet connections
QJJS male body
Seal
Spray tip
Miniature Quick FloodJet Spray Tip
Typical Quick FloodJet nozzles are comprised of a QJJS male body, spray tip and seal.
QSTK
Below 1 gpm (3.9 l/min)
at 40 psi (2.8 bar)
Performance Data
| *At the stated pressure in psi. | ||||||||||||||||
| Inlet Conn. (in.) |
Quick FloodJet Tip Type |
Capacity Size |
Equiv. Orifice Dia. (in.) |
Capacity (gallons per minute)* |
Spray Angle (°)* |
|||||||||||
| QSTK | QTKA | 3 | 5 | 7 | 10 | 15 | 20 | 30 | 40 | 60 | 7 | 20 | 60 | |||
| 1/8,
1/4, 3/8, 1/2 |
• | .25 | .017 | .01 | .02 | .02 | .03 | .03 | .04 | .04 | .05 | .06 | – | 83 | 117 | |
| • | • | .50 | .023 | .03 | .04 | .04 | .05 | .06 | .07 | .09 | .10 | .12 | – | 89 | 122 | |
| • | • | .75 | .029 | .04 | .05 | .06 | .075 | .09 | .11 | .13 | .15 | .18 | – | 106 | 125 | |
| • | • | 1 | .033 | .05 | .07 | .08 | .10 | .12 | .14 | .17 | .20 | .24 | – | 109 | 128 | |
| • | • | 1.5 | .040 | .08 | .11 | .13 | .15 | .18 | .21 | .26 | .30 | .37 | 73 | 108 | 125 | |
| • | • | 2 | .047 | .11 | .14 | .17 | .20 | .24 | .28 | .35 | .40 | .49 | 83 | 113 | 129 | |
| • | • | 2.5 | .052 | .14 | .18 | .21 | .25 | .31 | .35 | .43 | .50 | .61 | 98 | 122 | 133 | |
| • | • | 3 | .057 | .16 | .21 | .25 | .30 | .37 | .42 | .52 | .60 | .73 | 86 | 112 | 126 | |
| • | • | 4 | .066 | .22 | .28 | .33 | .40 | .49 | .57 | .69 | .80 | .98 | 97 | 123 | 132 | |
| • | • | 5 | .074 | .27 | .35 | .42 | .50 | .61 | .71 | .87 | 1.0 | 1.2 | 114 | 128 | 142 | |
| • | 7.5 | .091 | .41 | .53 | .63 | .75 | .92 | 1.1 | 1.3 | 1.5 | 1.8 | 101 | 119 | 134 | ||
| • | 10 | .105 | .55 | .71 | .84 | 1.0 | 1.2 | 1.4 | 1.7 | 2.0 | 2.4 | 115 | 133 | 145 | ||
| • | 12 | .115 | .66 | .85 | 1.0 | 1.2 | 1.5 | 1.7 | 2.1 | 2.4 | 2.9 | 128 | 139 | 153 | ||
| • | 15 | .128 | .82 | 1.1 | 1.3 | 1.5 | 1.8 | 2.1 | 2.6 | 3.0 | 3.7 | 98 | 113 | 123 | ||
| • | 18 | .140 | .99 | 1.3 | 1.5 | 1.8 | 2.2 | 2.5 | 3.1 | 3.6 | 4.4 | 106 | 120 | 131 | ||
| • | 20 | .148 | 1.1 | 1.4 | 1.7 | 2.0 | 2.4 | 2.8 | 3.5 | 4.0 | 4.9 | 110 | 122 | 133 | ||
| 3/8, 1/2 | • | 30 | .181 | 1.6 | 2.1 | 2.5 | 3.0 | 3.7 | 4.2 | 5.2 | 6.0 | 7.3 | 100 | 110 | 121 | |
| • | 40 | .209 | 2.2 | 2.8 | 3.3 | 4.0 | 4.9 | 5.7 | 6.9 | 8.0 | 9.8 | 111 | 126 | 136 | ||
| • | 45 | .222 | 2.5 | 3.2 | 3.8 | 4.5 | 5.5 | 6.4 | 7.8 | 9.0 | 11.0 | 115 | 130 | 140 | ||
| • | 60 | .256 | 3.3 | 4.2 | 5.0 | 6.0 | 7.3 | 8.5 | 10.4 | 12.0 | 14.7 | 120 | 134 | 142 | ||
