B23 - Quick FullJet® and ProMax® Quick FullJet Spray
Nozzles, Wide Angle Spray
Performance Data
| *At the stated pressure in psi. | |||||||||||||||||||
| Inlet Conn. (in.) |
Quick FullJet Tip Type | Capacity Size |
Orifice Dia. Nom. (in.) |
Max. Free Passage Dia. (in.) |
Capacity (gallons per minute)* |
Spray Angle (°)* |
|||||||||||||
| QGA-W | QLGA-W | QHA-W | QLHA-W | QPHA-W | 5 | 7 | 10 | 20 | 30 | 40 | 60 | 80 | 5 | 10 | 80 | ||||
| 1/8,
1/4, 3/8, 1/2 (QPHA 1/4, 3/8 only) |
• | • | • | 2.8W | .063 | .040 | – | – | .28 | .40 | .48 | .56 | .69 | .79 | – | 120 | 102 | ||
| • | • | 4.3W | .078 | .040 | – | – | .43 | .61 | .74 | .86 | 1.1 | 1.2 | – | 120 | 102 | ||||
| • | • | • | 5.6W | .094 | .040 | – | .47 | .56 | .79 | .97 | 1.1 | 1.4 | 1.6 | – | 120 | 102 | |||
| • | • | • | 8W | .094 | .050 | – | .67 | .80 | 1.1 | 1.4 | 1.6 | 2.0 | 2.3 | – | 120 | 103 | |||
| 1/4,
3/8, 1/2 (QPHA 1/4, 3/8 only) |
• | • | • | 10W | .109 | .050 | .71 | .84 | 1.0 | 1.4 | 1.7 | 2.0 | 2.4 | 2.8 | 112 | 120 | 103 | ||
| • | • | • | 12W | .125 | .050 | .85 | 1.0 | 1.2 | 1.7 | 2.1 | 2.4 | 2.9 | 3.4 | 114 | 120 | 103 | |||
| • | • | • | 14W | .141 | .063 | .99 | 1.2 | 1.4 | 2.0 | 2.4 | 2.8 | 3.4 | 4.0 | 114 | 120 | 103 | |||
| 3/8, 1/2 | • | 17W | .156 | .063 | 1.2 | 1.4 | 1.7 | 2.4 | 2.9 | 3.4 | 4.2 | 4.8 | 114 | 120 | 103 | ||||
| • | • | 20W | .172 | .094 | 1.4 | 1.7 | 2.0 | 2.8 | 3.5 | 4.0 | 4.9 | 5.7 | 114 | 120 | 104 | ||||
| • | 24W | .188 | .094 | 1.7 | 2.0 | 2.4 | 3.4 | 4.2 | 4.8 | 5.9 | 6.8 | 114 | 120 | 104 | |||||
| • | 27W | .203 | .109 | 1.9 | 2.3 | 2.7 | 3.8 | 4.7 | 5.4 | 6.6 | 7.6 | 114 | 120 | 106 | |||||
| 1/2 | • | 30W | .219 | .109 | 2.1 | 2.5 | 3.0 | 4.2 | 5.2 | 6.0 | 7.3 | 8.5 | 114 | 120 | 108 | ||||
| • | 35W | .234 | .125 | 2.5 | 2.9 | 3.5 | 4.9 | 6.1 | 7.0 | 8.6 | 9.9 | 114 | 120 | 108 | |||||
| • | 40W | .250 | .125 | 2.8 | 3.3 | 4.0 | 5.7 | 6.9 | 8.0 | 9.8 | 11.3 | 114 | 120 | 108 | |||||
| • | 45W | .250 | .141 | 3.2 | 3.8 | 4.5 | 6.4 | 7.8 | 9.0 | 11.0 | 12.7 | 114 | 120 | 110 | |||||
| • | • | 50W | .266 | .156 | 3.5 | 4.2 | 5.0 | 7.1 | 8.7 | 10.0 | 12.2 | 14.1 | 114 | 120 | 112 | ||||
|
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. |
|||||||||||||||||||
Dimensions and Weights
| Standard | Nozzle Type |
Length (in.) |
Hex. (in.) |
Net Weight (oz.) |
 |
QJA+QGA-W | 2-11/16 | 1 | 5-1/2 |
| QJJA+QGA-W | 2-5/8 | 7/8 | 4-1/2 | |
| QJLA+QLGA-W | 3-5/32 | 1-1/8 | 8-1/2 | |
| QJJLA+QLGA-W | 3-3/16 | 1-1/8 | 8-1/2 | |
 |
QJA+QHA-W | 2-1/16 | 1 | 3-1/2 |
| QJJA+QHA-W | 1-31/32 | 1 | 3-1/2 | |
| QJLA+QLHA-W | 2-7/16 | 1-1/8 | 5 | |
| QJJLA+QLHA-W | 2-1/2 | 1-1/8 | 5 | |
 |
QPPA+QPHA-W | 1-3/4 | 7/8 | 1/2 |
|
Based on largest/heaviest version of each type. |
||||
Body Types
|
Inlet Conn. (in.) |
Standard Body | ||||
| Conn. F |
Conn. M |
||||
| QJA | QJLA | QJJA | QJJLA | QPPA | |
| 1/8 | • | • | |||
| 1/4 | • | • | • | ||
| 3/8 | • | • | • | • | • |
| 1/2 | • | • | • | • | |
Materials
| Material | Material Code |
Spray Tip | |||
| QGA-W | QLGA-W | QHA-W | QLHA-W | ||
| Brass | (none) | • | • | • | • |
| 303 Stainless Steel | SS | • | • | • | • |
|
Standard Quick FullJet nozzles available in either brass with a Buna-N seal or stainless steel with a Viton® seal. ProMax Quick FullJet nozzles available with a Viton seal. Other materials available upon request. |
|||||
